Wave problem
Dear All
I set up a model of the seabed to the left side the second order wave made rules, 20 m, 2 m wave height, wave period, 10 seconds at point a, b, c, d, respectively, set up the observation point, but found that simulate a, d point of wave height showed a trend of larger before they are smaller, and wave height to 2 m, b, d point wave attenuation, high attenuation also seems to be abnormal, what reason is this?
Comments
Did you measure Free Surface Elevation with measuretool or with gauges?
Depending on this please share your "elevation.txt" or you "Def.xml" file.
I assume either you did not configure correctly your respective file, or you you switched something around in your plot.
Best regards
I used measuretool to measure it.Here are my "elevation.txt" and" def.xml "files
Best regards
I assume you are doing something wrong in the Post Processing. I ran the simulation you sent and got the following:
Please note:
Thank you very much. I will try to see the result according to your suggestion.