Comparison of wave input and metropolitan measurements
I input waves using wavecoupling-02_RZ_RegularWaves, but when I measure with elevation, the wave height is about 10% lower than the input value.
The period is set to 6.21s and the wave height to 3m. The water depth is deep enough and the particle spacing is fine.
At this input value, the wave slope is 3/1.56t^2=6%, which is in the general Stokes wave range.
How do you think this can be resolved?
Comments
Please check first that discrepancies in the order of "dp" is acceptable since that is your numerical discretization.
Regards