toggle menu
DualSPHysics Forums
Categories
Discussions
Sign In
·
Register
Sign In
·
Register
Categories
Discussions
Sign In
·
Register
×
Home
›
DualSPHysics v4.4
How to make a thick Boundary Box
C_Kesanapalli
April 2019
edited April 2019
in
DualSPHysics v4.4
May I know how to make a thick-walled box with controllable thickness?
Comments
Alex
April 2019
minimum thickness will be ONE dp... and to do that you can create a box by defining only one of the faces... as shown in XML_GUIDE_v4.4.pdf: page 36
other option is to create a box of width=dp
C_Kesanapalli
April 2019
I would like to know the option to set box wall thickness = 10*dp
TPouzol
April 2019
I'm not sure the option exist
One quick way to do it would be to create two boxes one inside the other, the faces being spaced as you want (i.e. 10dp), and then to fill the space in between
Good day
Alex
April 2019
You can use drawbox but using "size" as 10*dp in the direction you want
I do not see where is the problem
C_Kesanapalli
April 2019
That will only draw a hollow box or a full filled box. But I want to create a hollow box with a thick wall (>2*dp thickness).
C_Kesanapalli
April 2019
I found a way. Make each wall separately as a fully filled box and put it under the same MK value.
Sign In
or
Register
to comment.
Comments
other option is to create a box of width=dp
One quick way to do it would be to create two boxes one inside the other, the faces being spaced as you want (i.e. 10dp), and then to fill the space in between
Good day
I do not see where is the problem